My Computer Won't Recognize My Keyboard....? - antec ea500 apc ups problem
I had just built a new computer with the following:
MB GIGABYTE GA-MA790GP-DS4H 790GX R
MEM 1Gx2 | OCZ DII1066OCZ2N10662GK R
PSU ANTEC | EA500 500W TR
AMD | A64 X2 6000 3.0G AM2 2x1m R
I went back and are now connected to work and everything went well. I have a home and everything is ready and the boats moved to the main screen where it says you can start the BIOS access, new or restart normally Express, etc. The problem is that my keyboard n 'is not detected. The strange thing, I turned off the computer, disconnected everything and then everything just right. But when I plugged the computer keyboard. It is an old keyboard with the purple hat. The lights flicker on the keyboard, as it begins to start, and I can tell, the only key that works (only for a minute) is the Num Lock. When I NumLock light is lit, then the keyboard is locked. I've been done differently in the study to use the keyboard of my computer, not into a USB port. They have not keyboRD with a USB connector or adapter. This will be my next step is to buy a keyboard with a USB port to see if there is a difference, but in the meantime requested any help or suggestions will be. I tried several times to drive you to your computer and connect and disconnect everything except the keyboard into the team continues at startup every time it is good that the keyboard plugged into the port.
2 comments:
Get the best regular keyboard of a computer store back, and see if it works. If so, the problem of the old keyboard. Then you can use the new keyboard back and buy what they want.
I am not a computer expert, but what has happened to me recently. It is a feature that is useful in some way, people with disabilities.
Go to Control Panel yor. Select Accessibility. I read that the brand "Sticky Keys," was not found on my computer. So I checked on me, and then click "Settings" and check "Disable sticky keys if two keys pressed will sound at once" and "make when the switch button is pressd" and "Status Display screen snap, I realized that is the first option, I found a link option to five times the Shift key to hit to activate Sticky Keys.
So, after closing the windows and turn on the screen of my office, I hit the shift key a few times and makes a sound heard with each heartbeat. StickyKey the status symbol in the right corner of the screen (shown in the opposite corner of the Start button). Simply press the SHIFT key until my "I was snapping extinguished. And write in WebSearch tryed and it worked!
Then Ithe control panel from sticky keys. I do not know if this can help prevent stiffness, "future" or not.
Good luck. I hop it for you!
Post a Comment